rebellegion hashtag performance

#RebelLegion: Daring cosplayers, Star Wars enthusiasts, passionate fandom. Epic costumes, lightsaber duels, charitable endeavors. Spreading joy, celebrating creativity, embracing the Force. Uniting fans globally.

This was my first time trying the full cosplay on and I’m not sure about how I feel modesty-wise without the feather cape, but I’ll definitely have to work up the confidence before wearing it out this way (if ever) 😂 <>•<>•<>•<>•<>•<>•<>•<>•<>•<>•<> #starwars #attackoftheclones #Padmé #padmeamidala #blackcorsetgown #rebellegion #fulcrumbase #rebellegionfulcrumbase #padmeamidalacosplay #fireside #padmefireside #DIY #padmecosplay #cosplay #cosplayer #obiwankenobi #padmeamidalacosplayer #naboo #natalieportman #cosplaygirl #starwarscosplay #rebellegion #handmade #crafting #anakinskywalker #lukeskywalker #princessleia #leiaorgana #yoda #2024

I am making a series of the process I learned from raw print to final helmet product. This is a Hunter helmet from the Bad Batch designed by Jace1969 available for free on thingiverse. I started with a raw print off my @Elegoo 3D Official Neptune Max 3 at 50 percent speed since I am short on filament and I hate wasting filament on failure I slow everything down. I used modeling paste medium acrylic instead of bondo because it is non toxic. Add some paste and mix alittle bit of water and stir til it is foaming and apply a thin layer to begin and hit big spots with additional layers. It takes a few hours to overnight to dry out. Once that is done you have to sand it down and add a few layers of filler primer. I will go over that in the next part. #thebadbatch #badbatchtech #clonetrooper #cloneforce99 #techbadbatch #badbatchcosplay #starwarscosplay #starwarsfan #501stlegion #rebellegion #crosshair #clonetroopercosplay #theclonewars #tech #Starwarsprequels #techcosplay #starwarsboy #3dprinting

I am making a series of the process I learned from raw print to final helmet product. This is a Hunter helmet from the Bad Batch designed by Jace1969 available for free on thingiverse. I started with a raw print off my @Elegoo 3D Official Neptune Max 3 at 50 percent speed since I am short on filament and I hate wasting filament on failure I slow everything down. I used modeling paste medium acrylic instead of bondo because it is non toxic. Add some paste and mix alittle bit of water and stir til it is foaming and apply a thin layer to begin and hit big spots with additional layers. It takes a few hours to overnight to dry out. Once that is done you have to sand it down and add a few layers of filler primer. I will go over that in the next part. #thebadbatch #badbatchtech #clonetrooper #cloneforce99 #techbadbatch #badbatchcosplay #starwarscosplay #starwarsfan #501stlegion #rebellegion #crosshair #clonetroopercosplay #theclonewars #tech #Starwarsprequels #techcosplay #starwarsboy #3dprinting

start an influencer campaign that drives genuine engagement

Company

Home Case Studies Reports Blog Careers

Technology

Fastest Growing