Kyra

sawstop hashtag performance

#SawStop showcases innovative safety technology in woodworking. It promotes awareness about table saw dangers, emphasizing accident prevention, user education, and encourages discussions on equipment safety for woodworkers and hobbyists alike.
Simple Set Fence Gauges make dialing in your miter slot to your table saw fence and blade a breeze. Simple Set Fence Gauges fit in your table saw miter slot and hold an extendable stainless steel touch-off probe perpendicular to the slot. Just slide the probe until it touches your fence, lock the thumbwheel and that’s it - a perfect physical reference between the miter slot and the fence. The Simple Set works with any table saw that has a miter slot nominally 3/8” x 3/4”. Using the same patent pending design found in our Exact-90 Miter Gauge, leaf springs keep the miter bar in perfect position whether your slot it dead-on, a little too wide or a little too tight. The two-piece stainless steel rods and threaded brass points give you the flexibility to have just the right amount of length for any alignment job, from 1/2” up to 19” from the edge of the slot. To use Simple Set even further from the fence, you can add the optional Extension Kit which gives you an additional 24” of reach for a total of 43”. The Extension Kit also includes a bridge to support the extended rod and keep everything in line. If you’d like to learn more about this tool or order yours today, click the link in bio! Tools Used: 1️⃣ Simple Set Fence Gauge - Pair SKU: SSFG-24 2️⃣ Simple Set Fence Gauge - Extension Kit Only SKU: SSFG-24-EXT #woodpeckerstools #woodworking #woodworkingtools #woodworkersofinstagram #woodworkingshop #tablesaw #sawstop
137.0k
Simple Set Fence Gauges make dialing in your miter slot to your table saw fence and blade a breeze. Simple Set Fence Gauges fit in your table saw miter slot and hold an extendable stainless steel touch-off probe perpendicular to the slot. Just slide the probe until it touches your fence, lock the thumbwheel and that’s it - a perfect physical reference between the miter slot and the fence. The Simple Set works with any table saw that has a miter slot nominally 3/8” x 3/4”. Using the same patent pending design found in our Exact-90 Miter Gauge, leaf springs keep the miter bar in perfect position whether your slot it dead-on, a little too wide or a little too tight. The two-piece stainless steel rods and threaded brass points give you the flexibility to have just the right amount of length for any alignment job, from 1/2” up to 19” from the edge of the slot. To use Simple Set even further from the fence, you can add the optional Extension Kit which gives you an additional 24” of reach for a total of 43”. The Extension Kit also includes a bridge to support the extended rod and keep everything in line. If you’d like to learn more about this tool or order yours today, click the link in bio! Tools Used: 1️⃣ Simple Set Fence Gauge - Pair SKU: SSFG-24 2️⃣ Simple Set Fence Gauge - Extension Kit Only SKU: SSFG-24-EXT #woodpeckerstools #woodworking #woodworkingtools #woodworkersofinstagram #woodworkingshop #tablesaw #sawstop
Stopping the Saw for the day!!! Listen to the bing sound!#foryoupage #sawstop#saw #ballantinesawteeth #tigercatforestry
60.8k
Stopping the Saw for the day!!! Listen to the bing sound!#foryoupage #sawstop#saw #ballantinesawteeth #tigercatforestry
Replying to @miniks the hardest and oldest tree in the rain forest made a lot of smoke. Rip rainforest. #foryoupage #saw #sawstop #smoked #tigercatforestry #ballantinesawteeth
13.6k
Replying to @miniks the hardest and oldest tree in the rain forest made a lot of smoke. Rip rainforest. #foryoupage #saw #sawstop #smoked #tigercatforestry #ballantinesawteeth
Woodpeckers Auxiliary Rip Fence adds precision, safety, and versatility to your standard table saw rip fence, no matter whether it’s brand new or 60 years old. The heavily ribbed extruded aluminum fence is straighter, longer and taller than your standard rip fence. The plywood fence faces found on most modern rip fences are subject to movement from temperature and humidity changes. Even inconsistent pressure on the mounting screws can warp and twist the face. By simply clamping on the Auxiliary Rip Fence, you have a straighter reference for the edge of your material. Plus, the extra length and the included material support hold your workpiece up on either the infeed or outfeed side of the blade...now you can focus on the cut rather than balancing your board. The Auxiliary Rip Fence is secured to your standard fence using precision-machined aluminum clamping blocks and normal track clamps. The combination of the clamping blocks and the fence is precisely 2”, which means your fence scale is still usable. Just add 2” to your desired dimension and set your fence. The 7 T-tracks in the fence allow you to reconfigure it in countless ways and easily add featherboards, stops and jigs. Give your table saw fence the face lift it deserves with Woodpeckers new Auxiliary Rip Fence. To learn more or order yours today, click the link in bio! Tools Used: 1️⃣ Auxiliary Rip Fence - 48 inch SKU: ARF-48 2️⃣ Variable Pressure Featherboard - Pair SKU: VPFB #Woodworking #woodpeckerstools #Sawstop #woodshop #woodworkingvideo #woodworkersofinstagram #woodshoplife #tablesaw #tablesawfence
10.0k
Woodpeckers Auxiliary Rip Fence adds precision, safety, and versatility to your standard table saw rip fence, no matter whether it’s brand new or 60 years old. The heavily ribbed extruded aluminum fence is straighter, longer and taller than your standard rip fence. The plywood fence faces found on most modern rip fences are subject to movement from temperature and humidity changes. Even inconsistent pressure on the mounting screws can warp and twist the face. By simply clamping on the Auxiliary Rip Fence, you have a straighter reference for the edge of your material. Plus, the extra length and the included material support hold your workpiece up on either the infeed or outfeed side of the blade...now you can focus on the cut rather than balancing your board. The Auxiliary Rip Fence is secured to your standard fence using precision-machined aluminum clamping blocks and normal track clamps. The combination of the clamping blocks and the fence is precisely 2”, which means your fence scale is still usable. Just add 2” to your desired dimension and set your fence. The 7 T-tracks in the fence allow you to reconfigure it in countless ways and easily add featherboards, stops and jigs. Give your table saw fence the face lift it deserves with Woodpeckers new Auxiliary Rip Fence. To learn more or order yours today, click the link in bio! Tools Used: 1️⃣ Auxiliary Rip Fence - 48 inch SKU: ARF-48 2️⃣ Variable Pressure Featherboard - Pair SKU: VPFB #Woodworking #woodpeckerstools #Sawstop #woodshop #woodworkingvideo #woodworkersofinstagram #woodshoplife #tablesaw #tablesawfence
Might as well bring this beauty back! #woodworking #sawstop #opps #colorado #coloradosmallbusiness
6.1k
Might as well bring this beauty back! #woodworking #sawstop #opps #colorado #coloradosmallbusiness
Switching from Dado Stack to Regular Blade on a SawStop in Under 2 Minutes! #woodworking #sawstop #bladechange #dadostack #woodworkingtip #woodworkingtools #woodworkingcommunity #woodtok
449.0
Switching from Dado Stack to Regular Blade on a SawStop in Under 2 Minutes! #woodworking #sawstop #bladechange #dadostack #woodworkingtip #woodworkingtools #woodworkingcommunity #woodtok

start an influencer campaign that drives genuine engagement

Company

HomeCase StudiesReportsBlogCareers

Technology

Fastest Growing